Memory Alpha
Advertisement
Memory Alpha
Multiple realities
(covers information from several alternate timelines)
Xindi weapon

The Xindi primary weapon is launched

The Xindi weapons were large mobile particle beam weapons designed to cause destruction to planets. There were three weapons built while the design was refined. The weapons were constructed by the five Xindi species in cooperation, at the instigation of the Sphere-Builders, who had informed the Xindi that Humans would be responsible for the destruction of the future Xindi homeworld in the 26th century. The final weapon's primary goal was the destruction of Earth.

Building the weapons[]

The weapons were designed primarily by Degra, a Xindi-Primate scientist and member of the Xindi Council, and constructed by the Aquatics. Most of the weapons' components were built by the Xindi, but at least one component came from the year 2573, supplied to the Xindi by the Sphere-Builders. (ENT: "The Expanse") Another key component of the weapons was the mineral kemocite, which was provided by a refining facility where Gralik Durr worked. (ENT: "The Shipment")

Research on the weapon was very dangerous. In September 2153, there was an accident in Degra's laboratory. Nearly all of his laboratory was destroyed, and three of his researchers were killed. The loss of the data caused the weapon's development to be set back by months, which induced the Council to consider developing a bio-weapon. (ENT: "Rajiin")

Probe[]

Xindi probe

The Xindi weapon prototype

The first prototype of the weapon was a small, one-man probe launched against Earth in 2153. It was constructed with the assistance of the Sphere-Builders, who provided at least one component from the future. The pilot was a Xindi-Reptilian personally selected by Commander Dolim, a Reptilian representative on the Xindi Council. Arriving at Earth through a subspace vortex, the probe fired a particle beam which cut a destructive swath from Florida to Venezuela, killing seven million people. The probe subsequently self-destructed, the debris landing in Central Asia. The wreckage and body of the pilot were recovered by a Vulcan transport and brought to Starfleet Command for analysis. Acting on intelligence provided by the Cabal's mysterious benefactor, Jonathan Archercaptain of Enterprise NX-01quantum dated the fragment of the probe provided to the Xindi by the Sphere-Builders, proving that it came from 420 years in the future. (ENT: "The Expanse", "Azati Prime")

Test weapon[]

Xindi cargo vessel carrying Xindi test weapon

The second prototype within its launch platform

Calindra System

The second prototype in the Calindra System

The second weapon prototype was unmanned and test-fired in a "proving ground" in the Calindra system inside the Delphic Expanse, under the supervision of Degra himself in December 2153. When not being used, this prototype was housed inside the Xindi launch platform.

During the test it was intended to destroy a small moon of a gas giant within the system. The test did not go as planned, as the weapon's materials had been sabotaged by Gralik on behalf of Jonathan Archer and instead part of the moon broke up. The weapon was subsequently stolen by the Andorian warship Kumari. The Andorians had hoped to take it home to use as a deterrent against the Vulcans. It was destroyed when T'Pol entered the activation codes and issued an overload command. The Kumari jettisoned the prototype before it exploded, but the shock wave caused significant damage to their power and engine systems. (ENT: "Proving Ground")

V'Las later used recorded footage of this test to justify preparations for a preemptive strike on Andoria to the rest of the Vulcan High Command, conveniently failing to mention that the Andorians had been prevented from studying it. (ENT: "Kir'Shara")

Primary weapon[]

Archer escapes from Xindi weapon

The weapon core prior to destruction

The final version of the weapon was substantially larger than its two predecessors and was designed to be manned by a skeleton crew. The interior of the weapon was mainly hollow. The exact core, however, contained the control area, where the weapon could be activated, fired or repaired. The only known way to deactivate the weapon was to invert a series of conduits in the proper sequence to cut power. Explosives could then destroy the core of the weapon. (ENT: "Twilight", "Proving Ground", "Countdown", "Zero Hour")

The eventual weapon was constructed in secret on Azati Prime, though when Enterprise discovered it there, it was moved to the Xindi Council planet. (ENT: "Azati Prime") When it became apparent that Captain Archer was becoming successful in convincing the Council to delay the attack on Earth, Commander Dolim's forces, working in concert with the Insectoids, hijacked the weapon. They also kidnapped Enterprise linguist Hoshi Sato and brainwashed her into decrypting the third activation code. (ENT: "The Council", "Countdown")

Enterprise, along with forces of the Primates, Arboreals, and Aquatics, attempted to stop the weapon from entering the vortex to Earth, but were repelled by a Reptilian and Insectoid fleet. The Reptilians and Insectoids were assisted by the creation of numerous anomalies by the Sphere-Builders, and one ship of each race escaped into the vortex with the weapon. The Insectoid ship was very shortly destroyed by the Reptilian one, however, when its commander questioned Dolim. (ENT: "Countdown")

Xindi weapon destroyed

The Xindi weapon is destroyed

The weapon emerged in Earth orbit ten hours later, but very close behind it was the vessel of the late Degra, manned by Enterprise personnel including Jonathan Archer, Malcolm Reed, and Hoshi Sato, as well as a MACO squad. The Kumari ran interference for Degra's lightly-armed vessel, enabling the Enterprise team to board the weapon and destroy it by overloading its reactor. Captain Archer was initially thought killed in the attempt while Dolim's ship was destroyed by the Kumari. (ENT: "Zero Hour")

In an alternate timeline where Archer was infected by interspatial parasites, Enterprise arrived at Azati Prime after the weapon had already been launched. The Xindi destroyed Earth with it before proceeding to wipe out most of the rest of Humanity. (ENT: "Twilight")

Appendices[]

See also[]

Background information[]

Script depictions[]

In an ultimately excised line of dialogue from the final draft script of "The Xindi", Degra stated, "The new weapon is far more complex" than the probe which attacked Earth.

In the script for "Twilight", the final Xindi weapon was initially referred to as "massive" and the script went on to say, "The weapon is far larger and more menacing than the device seen in 'The Expanse'... it’s covered with ablative armor and is bristling with weapon platforms." In other scripts written for Star Trek: Enterprise (such as the final draft scripts for both "Countdown" and "Zero Hour"), this weapon was commonly referred to as the "Primary Weapon".

In the final draft script of "Proving Ground", the second prototype was referred to as "the Xindi test weapon" and was described thus; "It's a more elaborate version of the probe that attacked Earth." Similarly, the effect of this prototype was intended to be, as pointed out in the script, "far more terrifying and spectacular than the original Xindi probe's attack on Earth."

Exterior[]

Visual Effects Producer Dan Curry was involved in designing the exterior appearance of the Xindi weapon. He later recalled, "The super weapon was really fun and one of the inspirations for that was... the Chinese carve these beautiful ivory balls that are layer upon layer upon layer, and can rotate in and out of themselves. So, we decided to give the super weapon a kinetic structure, so that it was constantly moving, so it looked always imminently threatening." Senior illustrator John Eaves created the final sketches of the weapon's exterior. ("Visual Effects Magic", ENT Season 4 DVD special features)

Pierre Drolet

Pierre Drolet, CGI modeler of the Xindi weapon, with the weapon displayed on a screen behind him

A physical studio model of the Xindi weapon's exterior was never built. ("Countdown" audio commentary, ENT Season 3 Blu-ray special features) From the concept sketches, CGI artists at Eden FX built the computer models of the weapon. Pierre Drolet, Eden's lead 3D modeler, was instrumental in providing the CG version. As a time-saving measure, he built the digital model by first concentrating on only one quarter of the entire Xindi weapon, then multiplying that portion to become the whole exterior. "You don't really see it, when it's all together like that," he noted. "It saved a lot of time, actually." ("Visual Effects Magic", ENT Season 4 DVD special features)

Another CG depiction of the Xindi weapon can be found in the ENT Season 3 DVD, as part of a computer-animated sequence that introduces the main menu for each disc.

Co-Executive Producer Chris Black and Executive Story Editor André Bormanis agreed that the exterior of the Xindi weapon, which Bormanis somewhat confusingly referred to as "a sphere," is "very cool." ("Countdown" audio commentary, ENT Season 3 Blu-ray special features)

Core[]

Much of the Xindi weapon's interior was recycled portions of other sets which had been built for Star Trek. ("Countdown" audio commentary, ENT Season 3 Blu-ray special features) This included the weapon's core. For instance, the three rotating rings around the rotating sphere in the core of the Xindi weapon was a reuse of the gyrosphere from the episodes "A Night in Sickbay" and "Vanishing Point". Even the purple color of the rings remained the same. However, Star Trek paint supervisor Chuck Clark used an unusual paint on both the frame and the inner ball; the paint seemed to change color depending on the perspective from which it was viewed.

Wil Thoms with Xindi core

Wil Thoms waits to hurl the Xindi weapon core

The sphere itself was a reuse of the Romulan mine from "Minefield". The spinning gizmo was oddly not motorized to rotate but was instead firmly spun by hand, before each shot, by Special Effects Technician Wil Thoms. ("Countdown" text commentary, ENT Season 3 DVD) Production Designer Herman Zimmerman remarked, "The weapon core [sphere] is really a mechanical device – quite elaborate and quite effectively used on film. I will wager many people will look at it and say, 'Oh that must be a CGI effect' – when in reality it wasn't." Zimmerman also considered the entirely mechanical sphere to have been "an amazing reuse of a Romulan mine from 'Minefield'." (Star Trek: Communicator issue 151, p. 55)

Interior environment[]

The set for the Xindi weapon's interior was built on Paramount Stage 9. ("Countdown" text commentary, ENT Season 3 DVD; Star Trek: Communicator issue 151, p. 55) Herman Zimmerman noted that the set "took up the whole of Stage 9." He further commented, "We built from scratch the last two episodes – really huge sets, both of which had to be destroyed because we don't have any place to keep them and we probably will never see them again." (Star Trek: Communicator issue 151, p. 55)

The set for the weapon's interior was constructed on platforms about eight feet above the floor of the stage. Although this allowed for the filming of live-action footage involving the weapon's catwalks, the platforming tended to slightly slow filming, as equipment such as cameras and lights had to be hauled up and down to be used on the set. ("Countdown" text commentary, ENT Season 3 DVD) Herman Zimmerman pointed out that, though the catwalks were brand new, "the arches behind them" were reused ship hulls, originally built as parts of the starship Enterprise's exterior in ENT: "The Forgotten" and turned vertical for their Xindi modification. (Star Trek: Communicator issue 151, pp. 55 & 59)

The weapon interior was additionally represented with some wide shots being completely computer-generated. The digital model of the interior was additionally used to extend the actual set. In the case of one such shot being required, a green screen was used on the stage floor, to later be replaced by the visual effects crew in post-production. ("Countdown" text commentary, ENT Season 3 DVD) Following a rare set visit to the weapon interior set during production, Chris Black found the set memorable and was of the opinion that it was notable for the increased degree to which it allowed for visual effects. "I remember [...] that they, you know, they had built the railings and the platform and then it was just all, you know, green screen all round it," he recollected. ("Countdown" audio commentary, ENT Season 3 Blu-ray special features)

Xindi weapon interior rigging

Dennis Drozdowski and John Peyser prepare to simulate the Xindi weapon's destruction

To depict the destruction of the Xindi weapon from inside the craft, explosive charges were wired by special effects artist Dennis Drozdowski and spark cones, which directed showers of sparks, were rigged by electronics foreman John Peyser. (Star Trek: Communicator issue 152, p. 47) Footage of the weapon's destruction was not only included in "Zero Hour" but was also reused as archive footage in "Storm Front, Part II".

Apocrypha[]

The cover for the novelization of The Expanse features an artist's rendering, illustrated by Doug Drexler, of the Xindi probe firing at the Earth. Though the probe itself looks much like it does in the episode "The Expanse", the beam it emits, in the picture, is colored blue.

The Expanse also states that, prior to the initial weapon's use against Earth, hundreds of simulations plotting the firing of the weapon were run. Commonly referring to this craft as "the destroyer/probe," the book indicates that the interior of this initial weapon consisted of two compartments, with an engine area and a command section. The latter portion of the craft had a deck for the pilot to sit or stand on, controls for navigational, tactical and communication functions, as well as a small monitor on which the craft's exterior could be viewed. To fire the weapon, the targeted area had to be programmed into the craft's sites. This was followed by the concentric spheres on the outside of the weapon automatically rotating into place, lining up the craft's emitters. The powering up of the weapon caused the deck beneath the pilot's feet to hum. The craft was also designed to relay information about the attack back to the Xindi and was programmed to self-destruct. The probe had multiple explosives that caused the weapon to auto-destruct, including one that was located in its engine and triggered separately from the rest.

The novel Last Full Measure states that fuel residue and a distinct energy pattern were discovered in the wreckage of the Xindi probe. In the same book, ion trails resembling the residue lead an away team to their first sighting of Xindi-Reptilians, as a pair of them appear in a video replay on the planet Kaletoo, where their vessel had been. The footage shows the Reptilians meeting with a courier named La'an Trahve, whose clothing is later found to have traces of the same energy signature as was found in the probe's remains.

Part of the video game Star Trek: Encounters involves Enterprise's search for the Xindi weapon. In the game's final level, a temporal anomaly makes the weapon, a Xindi fleet, and Enterprise appear in the 24th century, where it is destroyed thanks to both the Enterprise NX-01, and the USS Enterprise-E.

In the video game Star Trek Online, the Xindi-Reptilian Contortrix Escort starship is able to deploy a miniature version of the Xindi weapon for use in combat.

According to the game Star Trek: Attack Wing the final Xindi weapon was called Weapon Zero.

This is a featured article. At the time it was last featured (May 2012), it was considered one of the best examples of the Memory Alpha community's work. This article was last featured more than five years ago though, and its status should be reviewed. You can use the links below to see how the article has changed since it was last featured.
Original featured revision (18001)Diff to currentLast featured revision (1393956)Diff to currentBlurb
Advertisement